#Gameplay values shared between client and server
[common]
	#Base thrust at 100% throttle for normal (non-beam, non-soul) thrusters. Default 640 gives ~2.94 kpN at full throttle in standard atmosphere.
	# Default: 640.0
	# Range: 1.0 ~ 100000.0
	thrusterBaseThrust = 640.0
	#Base airflow at 100% throttle
	# Default: 80.0
	# Range: 0.0 ~ 100000.0
	thrusterBaseAirflow = 80.0
	#Base fuel usage in mB/t at 100% throttle for a neutral fuel
	# Default: 5.6
	# Range: 0.01 ~ 1000.0
	thrusterBaseFuelUsePerTick = 5.6
	#Fuel curve exponent: >1 makes low throttle significantly more efficient
	# Default: 1.35
	# Range: 0.1 ~ 4.0
	thrusterFuelThrottleExponent = 1.35
	#Thrust multiplier for beam (focused/lense) thruster mode. Default 1.5 gives ~4.41 kpN at full throttle, above normal thrusters at ~2.94 kpN.
	# Default: 1.5
	# Range: 0.0 ~ 100.0
	beamThrustMultiplier = 1.5
	#Fuel efficiency multiplier for fluids tagged as dense thruster fuels
	# Default: 1.45
	# Range: 0.01 ~ 100.0
	denseFuelEfficiencyMultiplier = 1.45
	#Fuel efficiency multiplier for fluids tagged as light thruster fuels
	# Default: 0.7
	# Range: 0.01 ~ 100.0
	lightFuelEfficiencyMultiplier = 0.7
	#Maximum pivot angle in degrees when bearing receives full redstone differential
	# Default: 90.0
	# Range: 1.0 ~ 180.0
	bearingMaxPivotAngleDeg = 90.0
	#Bearing interpolation factor per tick (0 = no movement, 1 = snap)
	# Default: 0.25
	# Range: 0.0 ~ 1.0
	bearingSmoothing = 0.25
	#Bearing target debounce ticks before motion updates
	# Default: 2
	# Range: 0 ~ 40
	bearingDebounceTicks = 2
	#Maximum tilt angle in degrees for thruster gimbals
	# Default: 30.0
	# Range: 0.0 ~ 89.0
	gimbalMaxTiltAngleDeg = 30.0
	#Minimum vector length before gimbal applies steering
	# Default: 0.001
	# Range: 0.0 ~ 1.0
	gimbalDeadzone = 0.001
	#Gimbal interpolation factor per tick (0 = no movement, 1 = snap)
	# Default: 0.2
	# Range: 0.0 ~ 1.0
	gimbalSmoothing = 0.2
	#Gimbal target debounce ticks before motion updates
	# Default: 2
	# Range: 0 ~ 40
	gimbalDebounceTicks = 2
	#Base smoothing factor used by stabilizer mode before physics scaling
	# Default: 0.12
	# Range: 0.0 ~ 1.0
	gimbalStabilizerSmoothing = 0.12
	#Maximum stabilizer direction step per tick (vector units)
	# Default: 0.08
	# Range: 0.001 ~ 1.0
	gimbalStabilizerMaxStepPerTick = 0.08
	#Stabilizer proportional gain applied to tilt error
	# Default: 1.15
	# Range: 0.0 ~ 8.0
	gimbalStabilizerProportionalGain = 1.15
	#Stabilizer damping gain applied to tilt error rate
	# Default: 0.85
	# Range: 0.0 ~ 8.0
	gimbalStabilizerDampingGain = 0.85
	#Blend factor for cooperative stabilizer contract with sibling gimbals on the same sublevel
	# Default: 0.65
	# Range: 0.0 ~ 1.0
	gimbalStabilizerContractBlend = 0.65
	#Maximum additive throttle feather offset applied per thruster by stabilizer mode
	# Default: 0.3
	# Range: 0.0 ~ 1.0
	gimbalStabilizerMaxFeatherOffset = 0.3
	#Maximum static per-face angle reported by the bi-directional gearbox from gyro input
	# Default: 90.0
	# Range: 1.0 ~ 180.0
	gearboxMaxStaticAngleDeg = 90.0
	#Invert gearbox gyro-derived face angles and redstone outputs when the gearbox is powered
	gearboxReverseWithRedstone = true
	#FE consumed per tick at 100% throttle when a thruster is in focused/beam mode. Scales linearly with throttle.
	# Default: 90.0
	# Range: 1.0 ~ 100000.0
	focusedModeFePerTick = 90.0
	#Maximum FE a beam thruster can store internally
	# Default: 100000
	# Range: 1000 ~ 10000000
	focusedModeFeCapacity = 100000
	#Maximum multiplier allowed from propulsion upgrades. Tiers apply 2x, 4x, 8x, and 16x before this cap.
	# Default: 16.0
	# Range: 1.0 ~ 64.0
	propulsionUpgradeMaxMultiplier = 16.0
	#Alternator minimum RPM before it starts generating FE
	# Default: 32.0
	# Range: 1.0 ~ 1024.0
	alternatorMinRpm = 32.0
	#Alternator rated RPM where it reaches max FE/t output
	# Default: 256.0
	# Range: 8.0 ~ 4096.0
	alternatorRatedRpm = 256.0
	#Alternator FE generated per tick at rated RPM. Default 5000 = 512 kFE/t at rated speed.
	# Default: 5000
	# Range: 1 ~ 1000000
	alternatorMaxFePerTick = 5000
	#Alternator maximum stress impact (SU) drawn at rated RPM. Scales linearly with speed down to 0 at min RPM. Default 96800 SU at 256 RPM rated speed, balanced for 512 kFE/t output.
	# Default: 96800.0
	# Range: 1.0 ~ 1.0E7
	alternatorMaxStressImpact = 96800.0
	#Powered Zipline hanging-rope anchor motion damping while ropes are attached. 0 = instant start/stop, 1 = strongest smoothing/coasting. Higher values reduce sway from hard starts and stops.
	# Default: 0.45
	# Range: 0.0 ~ 1.0
	poweredZiplineRopeAttachmentInertiaDamping = 0.45
